[    0.000000] Linux version 6.1.0-rc6-0-starfive (mps@mps-edge-riscv64) (gcc (Alpine 12.2.1_git20220924-r2) 12.2.1 20220924, GNU ld (GNU Binutils) 2.39) #1-Alpine SMP PREEMPT Thu, 15 Dec 2022 16:24:58 +0000
[    0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[    0.000000] Machine model: StarFive VisionFive V1
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000ff000000
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000a0000000, size 640 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000f9000000, size 16 MiB
[    0.000000] OF: reserved mem: initialized node framebuffer@f9000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000fb000000, size 32 MiB
[    0.000000] OF: reserved mem: initialized node framebuffer@fb000000, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000080200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080200000-0x00000000cfffffff]
[    0.000000]   node   0: [mem 0x00000000d0000000-0x00000000f7ffffff]
[    0.000000]   node   0: [mem 0x00000000f8000000-0x00000000f8ffffff]
[    0.000000]   node   0: [mem 0x00000000f9000000-0x00000000f9ffffff]
[    0.000000]   node   0: [mem 0x00000000fa000000-0x00000000faffffff]
[    0.000000]   node   0: [mem 0x00000000fb000000-0x00000000fcffffff]
[    0.000000]   node   0: [mem 0x00000000fd000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff]
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI HSM extension detected
[    0.000000] riscv: base ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 18 pages/cpu s35176 r8192 d30360 u73728
[    0.000000] pcpu-alloc: s35176 r8192 d30360 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2067975
[    0.000000] Kernel command line: rw root=UUID=78e17a60-6f64-4eaa-a5fc-ca0ae60011ec rootwait console=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 2.
[    0.000000] software IO TLB: mapped [mem 0x000000009c000000-0x00000000a0000000] (64MB)
[    0.000000] Memory: 6728740K/8386560K available (6454K kernel code, 5281K rwdata, 2048K rodata, 2162K init, 526K bss, 986076K reserved, 671744K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: interrupt-controller@c000000: mapped 133 interrupts with 2 handlers for 4 contexts.
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] riscv-timer: riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns
[    0.000001] sched_clock: 64 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns
[    0.000303] Console: colour dummy device 80x25
[    0.000383] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=6250)
[    0.000401] pid_max: default: 32768 minimum: 301
[    0.000720] LSM: Security Framework initializing
[    0.001530] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002113] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.005676] cblist_init_generic: Setting adjustable number of callback queues.
[    0.005690] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.005872] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.006118] riscv: ELF compat mode unsupported
[    0.006125] ASID allocator disabled (0 bits)
[    0.006354] rcu: Hierarchical SRCU implementation.
[    0.006359] rcu: 	Max phase no-delay instances is 400.
[    0.006759] EFI services will not be available.
[    0.007121] smp: Bringing up secondary CPUs ...
[    0.008429] smp: Brought up 1 node, 2 CPUs
[    0.010208] devtmpfs: initialized
[    0.016886] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.016907] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.093943] pinctrl core: initialized pinctrl subsystem
[    0.095155] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.095831] thermal_sys: Registered thermal governor 'step_wise'
[    0.096300] cpuidle: using governor menu
[    0.097038] CCACHE: 2 banks, 16 ways, sets/bank=1024, bytes/block=64
[    0.097047] CCACHE: Index of the largest way enabled: 15
[    0.107411] platform 12000000.crtc: Fixing up cyclic dependency with soc:display-encoder
[    0.117855] SCSI subsystem initialized
[    0.118047] usbcore: registered new interface driver usbfs
[    0.118090] usbcore: registered new interface driver hub
[    0.118156] usbcore: registered new device driver usb
[    0.118522] pps_core: LinuxPPS API ver. 1 registered
[    0.118528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.119845] clocksource: Switched to clocksource riscv_clocksource
[    0.120306] VFS: Disk quotas dquot_6.6.0
[    0.120390] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.129063] NET: Registered PF_INET protocol family
[    0.133750] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.147224] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.147564] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.147608] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.150699] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.161112] TCP: Hash tables configured (established 65536 bind 65536)
[    0.163135] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.163538] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.164199] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.165148] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.165899] Unpacking initramfs...
[    0.179057] Initialise system trusted keyrings
[    0.181892] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    0.188088] zbud: loaded
[    0.191648] NET: Registered PF_ALG protocol family
[    0.191664] Key type asymmetric registered
[    0.191670] Asymmetric key parser 'x509' registered
[    0.377853] Freeing initrd memory: 3972K
[    0.400230] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.400394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.405463] dw_axi_dmac_platform 100b0000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    0.406989] dw_axi_dmac_platform 10500000.dma-controller: DesignWare AXI DMA Controller, 16 channels
[    0.409139] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.412998] vic-rng 118d0000.trng: Initialized
[    0.419579] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.419612] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    0.422179] xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c8 hci version 0x100 quirks 0x0000002000018010
[    0.422228] xhci-hcd xhci-hcd.0.auto: irq 10, io mem 0x104d0000
[    0.422304] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.422321] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    0.422341] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.423020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.423033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.423041] usb usb1: Product: xHCI Host Controller
[    0.423047] usb usb1: Manufacturer: Linux 6.1.0-rc6-0-starfive xhci-hcd
[    0.423054] usb usb1: SerialNumber: xhci-hcd.0.auto
[    0.423660] hub 1-0:1.0: USB hub found
[    0.423701] hub 1-0:1.0: 1 port detected
[    0.424103] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.424194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.424205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.424213] usb usb2: Product: xHCI Host Controller
[    0.424218] usb usb2: Manufacturer: Linux 6.1.0-rc6-0-starfive xhci-hcd
[    0.424225] usb usb2: SerialNumber: xhci-hcd.0.auto
[    0.424745] hub 2-0:1.0: USB hub found
[    0.424780] hub 2-0:1.0: 1 port detected
[    0.425798] usbcore: registered new interface driver uas
[    0.425939] usbcore: registered new interface driver usb-storage
[    0.426041] i2c_dev: i2c /dev entries driver
[    0.435358] Synopsys Designware Multimedia Card Interface Driver
[    0.435678] riscv-pmu-sbi: SBI PMU extension is available
[    0.435710] riscv-pmu-sbi: 15 firmware and 4 hardware counters
[    0.435717] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[    0.437070] NET: Registered PF_INET6 protocol family
[    0.438784] Segment Routing with IPv6
[    0.438876] In-situ OAM (IOAM) with IPv6
[    0.439476] registered taskstats version 1
[    0.439499] Loading compiled-in X.509 certificates
[    0.462606] Loaded X.509 cert 'Build time autogenerated kernel key: 71f48ba5ab00a803c3e148afec8b2fa95f1d7522'
[    0.463064] zswap: loaded using pool lzo/zbud
[    0.463705] Key type .fscrypt registered
[    0.463714] Key type fscrypt-provisioning registered
[    0.469712] dw-apb-uart 11870000.serial: detected caps 00000000 should be 00000100
[    0.469727] 11870000.serial: ttyS1 at MMIO 0x11870000 (irq = 15, base_baud = 4640625) is a 16550
[    0.471184] 12440000.serial: ttyS0 at MMIO 0x12440000 (irq = 16, base_baud = 6250000) is a 16550A
[    0.659856] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    0.661046] printk: console [ttyS0] enabled
[    0.793602] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
[    0.806734] dw_spi_mmio 12410000.spi: DMA init failed
[    0.814163] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.835728] dw_mmc 10000000.mmc: IDMAC supports 32-bit address mode.
[    0.837666] dw_mmc 10010000.mmc: IDMAC supports 32-bit address mode.
[    0.848225] dw_mmc 10000000.mmc: Using internal DMA controller.
[    0.852246] usb 1-1: Product: USB2.1 Hub
[    0.856926] tps65086 0-005e: Device: TPS650861, OTP: A, Rev: 0
[    0.864791] dw_mmc 10010000.mmc: Using internal DMA controller.
[    0.872406] dw_mmc 10000000.mmc: Version ID is 290a
[    0.879634] usb 1-1: Manufacturer: GenesysLogic
[    0.886459] i2c 0-0070: Fixing up cyclic dependency with soc:display-encoder
[    0.894065] dw_mmc 10010000.mmc: Version ID is 290a
[    0.896327] dw_mmc 10000000.mmc: DW MMC controller at irq 19,32 bit host data width,32 deep fifo
[    0.900739] dw_mmc 10010000.mmc: DW MMC controller at irq 20,32 bit host data width,32 deep fifo
[    0.906214] mmc_host mmc0: card is polling.
[    0.911173] dw_mmc 10010000.mmc: allocated mmc-pwrseq
[    0.925849] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    0.927098] hub 1-1:1.0: USB hub found
[    0.948871] mmc_host mmc1: card is non-removable.
[    0.954816] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    0.972854] mmc_host mmc1: Bus speed (slot 0) = 123750000Hz (slot req 400000Hz, actual 399193HZ div = 155)
[    0.976329] hub 1-1:1.0: 4 ports detected
[    1.143968] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[    1.150760] tda998x 0-0070: found TDA19988
[    1.170120] mmc0: new high speed SDXC card at address aaaa
[    1.182074] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
[    1.188946] mmcblk0: mmc0:aaaa SC64G 59.5 GiB 
[    1.190102] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.270185] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    1.273128] starfive-drm soc:display-subsystem: bound 12000000.crtc (ops 0xffffffff80c4d080)
[    1.274055] usb 2-1: Product: USB3.2 Hub
[    1.278736] [drm] found bridge on endpoint
[    1.286241] usb 2-1: Manufacturer: GenesysLogic
[    1.295544] starfive-drm soc:display-subsystem: bound soc:display-encoder (ops 0xffffffff80c4d3b8)
[    1.308531] hub 2-1:1.0: USB hub found
[    1.318122] [drm] Initialized starfive 1.0.0 20210519 for soc:display-subsystem on minor 0
[    1.322183] hub 2-1:1.0: 4 ports detected
[    1.336961] starfive-drm soc:display-subsystem: [drm] Cannot find any crtc or sizes
[    1.690208] dw-apb-uart 12440000.serial: forbid DMA for kernel console
[    1.699300]  mmcblk0: p1 p2
[    1.707557] Freeing unused kernel image (initmem) memory: 2160K
[    1.718893] Run /init as init process
[    1.722584]   with arguments:
[    1.722589]     /init
[    1.722594]   with environment:
[    1.722599]     HOME=/
[    1.722603]     TERM=linux
[    1.748874] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd
[    1.781143] Alpine Init 3.7.0-r0
[    1.785960] Loading boot drivers...
[    1.808268] mmc_host mmc1: Bus speed (slot 0) = 123750000Hz (slot req 50000000Hz, actual 30937500HZ div = 2)
[    1.818307] loop: module loaded
[    1.823971] Loading boot drivers: ok.
[    1.828613] mmc1: new high speed SDIO card at address 0001
[    1.837891] Mounting root...
[    1.856928] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[    1.872292] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.912487] usb 1-1.3: Product: Ultra USB 3.0
[    1.942887] usb 1-1.3: Manufacturer: SanDisk
[    1.963069] usb 1-1.3: SerialNumber: 4C531001351011122260
[    1.980905] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    1.988650] scsi host0: usb-storage 1-1.3:1.0
[    2.938202] F2FS-fs (mmcblk0p2): recover fsync data on readonly fs
[    2.947053] F2FS-fs (mmcblk0p2): Mounted with checkpoint version = 6ab2dc29
[    2.954983] Mounting root: ok.
[    3.044535] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
[    3.053854] sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[    3.064888] sd 0:0:0:0: [sda] Write Protect is off
[    3.069998] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    3.070401] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.104710]  sda: sda1 sda2
[    3.108921] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.749474] NET: Registered PF_PACKET protocol family
[    6.396972] dwmac-starfive 10020000.ethernet: IRQ eth_lpi not found
[    6.403470] dwmac-starfive 10020000.ethernet: Hash table entries set to unexpected value 32
[    6.411878] dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    6.422166] dwmac-starfive 10020000.ethernet: User ID: 0x59, Synopsys ID: 0x37
[    6.429419] dwmac-starfive 10020000.ethernet: 	DWMAC1000
[    6.434748] dwmac-starfive 10020000.ethernet: DMA HW capability register supported
[    6.442332] dwmac-starfive 10020000.ethernet: RX Checksum Offload Engine supported
[    6.449899] dwmac-starfive 10020000.ethernet: COE Type 2
[    6.455209] dwmac-starfive 10020000.ethernet: Wake-Up On Lan supported
[    6.461732] dwmac-starfive 10020000.ethernet: Enhanced/Alternate descriptors
[    6.468775] dwmac-starfive 10020000.ethernet: Enabled extended descriptors
[    6.475653] dwmac-starfive 10020000.ethernet: Ring mode enabled
[    6.481571] dwmac-starfive 10020000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.489659] dwmac-starfive 10020000.ethernet: device MAC address 6c:cf:39:00:05:a4
[    6.581862] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    6.591373] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[    7.175911] sf-i2svad 10420000.i2svad: error -ETIMEDOUT: failed to deassert source reset
[    7.194876] sf-i2svad: probe of 10420000.i2svad failed with error -110
[    7.289501] starfive-si5-wdt 12480000.watchdog: Heartbeat: timeout=15, count=750000000 (2cb41780)
[    7.572696] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.601682] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.613068] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.622150] cfg80211: failed to load regulatory.db
[    7.832972] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    8.044611] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021 01:12:21 version 7.45.98.118 (7d96287 CY) FWID 01-32059766
[    8.830462] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
[    9.516410] dwmac-starfive 10020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[    9.528888] dwmac-starfive 10020000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL)
[    9.540850] dwmac1000: Master AXI performs fixed burst length
[    9.546629] dwmac-starfive 10020000.ethernet eth0: No Safety Features support found
[    9.554311] dwmac-starfive 10020000.ethernet eth0: No MAC Management Counters available
[    9.562345] dwmac-starfive 10020000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    9.573718] dwmac-starfive 10020000.ethernet eth0: configuring for phy/rgmii-txid link mode
[    9.845353] random: crng init done
[   11.746811] starfive-drm soc:display-subsystem: [drm] Cannot find any crtc or sizes
[   58.864177] dwmac-starfive 10020000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   58.873110] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready