[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.7-postmarketos-exynos5 (pmos@build) (armv7-alpine-linux-musleabihf-gcc (Alpine 12.2.1_git20220924-r8) 12.2.1 20220924, GNU ld (GNU Binutils) 2.40) #1-postmarketOS SMP PREEMPT Sun Jan 22 21:38:59 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Google Peach Pi Rev 10+ [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0x00000000f8000000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000020000000-0x000000004fffffff] [ 0.000000] HighMem [mem 0x0000000050000000-0x00000000ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000020000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000020000000-0x00000000ffffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s39892 r8192 d21548 u69632 [ 0.000000] pcpu-alloc: s39892 r8192 d21548 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 915776 [ 0.000000] Kernel command line: console=tty root=/dev/mmcblk0p3 rw rootwait loglevel=7 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x0000000049ef6000-0x000000004def6000] (64MB) [ 0.000000] Memory: 3414820K/3670016K available (12288K kernel code, 1170K rwdata, 2552K rodata, 2048K init, 344K bss, 124124K reserved, 131072K cma-reserved, 2752512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000014] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 [ 0.000398] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000407] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000417] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000424] Ignoring duplicate/late registration of read_current_timer delay [ 0.000589] Console: colour dummy device 80x30 [ 0.000818] printk: console [tty0] enabled [ 0.000842] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000860] pid_max: default: 32768 minimum: 301 [ 0.000974] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000991] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001453] CPU: Testing write buffer coherency: ok [ 0.001490] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.001504] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.001749] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002392] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002412] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.002495] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.002582] Setting up static identity map for 0x20200000 - 0x20200060 [ 0.002733] ARM CCI driver probed [ 0.003173] Exynos MCPM support installed [ 0.003398] rcu: Hierarchical SRCU implementation. [ 0.003408] rcu: Max phase no-delay instances is 1000. [ 0.004252] smp: Bringing up secondary CPUs ... [ 0.004767] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004776] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.005370] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.005377] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.005951] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.005958] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.006605] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.007387] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.008088] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.008788] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.008983] smp: Brought up 1 node, 8 CPUs [ 0.009019] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.009031] CPU: All CPU(s) started in SVC mode. [ 0.009877] devtmpfs: initialized [ 0.020133] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.020280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.020303] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.023507] pinctrl core: initialized pinctrl subsystem [ 0.025122] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026312] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027190] audit: initializing netlink subsys (disabled) [ 0.027359] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.027623] thermal_sys: Registered thermal governor 'step_wise' [ 0.027781] cpuidle: using governor menu [ 0.028091] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.028105] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.084220] EXYNOS5420 PMU initialized [ 0.126298] platform panel: Fixing up cyclic dependency with 145b0000.dp-controller [ 0.199994] raid6: neonx8 gen() 3285 MB/s [ 0.268002] raid6: neonx4 gen() 4645 MB/s [ 0.335997] raid6: neonx2 gen() 4311 MB/s [ 0.403998] raid6: neonx1 gen() 3249 MB/s [ 0.471999] raid6: int32x8 gen() 1044 MB/s [ 0.540016] raid6: int32x4 gen() 1140 MB/s [ 0.608022] raid6: int32x2 gen() 1114 MB/s [ 0.676013] raid6: int32x1 gen() 961 MB/s [ 0.676023] raid6: using algorithm neonx4 gen() 4645 MB/s [ 0.744007] raid6: .... xor() 3121 MB/s, rmw enabled [ 0.744018] raid6: using neon recovery algorithm [ 0.745401] iommu: Default domain type: Translated [ 0.745414] iommu: DMA domain TLB invalidation policy: strict mode [ 0.745663] usbcore: registered new interface driver usbfs [ 0.745699] usbcore: registered new interface driver hub [ 0.745737] usbcore: registered new device driver usb [ 0.746139] s3c-i2c 12c80000.i2c: slave address 0x50 [ 0.746155] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.746346] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.746580] pps_core: LinuxPPS API ver. 1 registered [ 0.746591] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.747427] clocksource: Switched to clocksource mct-frc [ 0.747671] VFS: Disk quotas dquot_6.6.0 [ 0.747714] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.760785] NET: Registered PF_INET protocol family [ 0.761018] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.762156] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.762188] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.762206] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.762303] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.762443] TCP: Hash tables configured (established 8192 bind 8192) [ 0.762526] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.762558] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.762705] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.763153] Trying to unpack rootfs image as initramfs... [ 0.775861] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.776788] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.779235] Initialise system trusted keyrings [ 0.779566] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.824069] xor: measuring software checksum speed [ 0.827082] arm4regs : 3315 MB/sec [ 0.831385] 8regs : 2312 MB/sec [ 0.835729] 32regs : 2308 MB/sec [ 0.837963] neon : 4482 MB/sec [ 0.837973] xor: using function: neon (4482 MB/sec) [ 0.837992] Key type asymmetric registered [ 0.838003] Asymmetric key parser 'x509' registered [ 0.871321] Freeing initrd memory: 4196K [ 0.872942] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.873090] bounce: pool size: 64 pages [ 0.873175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.873338] io scheduler mq-deadline registered [ 0.873351] io scheduler kyber registered [ 0.873487] io scheduler bfq registered [ 0.875510] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 0.876099] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 0.876462] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator [ 0.880443] dma-pl330 3880000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.880461] dma-pl330 3880000.dma-controller: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.882058] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.882075] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.883713] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.883729] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.884329] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.884343] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.903477] dma-pl330 3880000.dma-controller: PM domain MAU will not be powered off [ 0.936461] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.937883] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 123, base_baud = 0) is a S3C6400/10 [ 0.938206] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 124, base_baud = 0) is a S3C6400/10 [ 0.938511] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 125, base_baud = 0) is a S3C6400/10 [ 0.938814] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 126, base_baud = 0) is a S3C6400/10 [ 0.940328] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 0.940924] exynos4-fb 14400000.fimd: Adding to iommu group 0 [ 0.942215] exynos-mixer 14450000.mixer: Adding to iommu group 1 [ 0.944366] exynos-rotator 11c00000.rotator: Adding to iommu group 2 [ 0.952902] brd: module loaded [ 0.953609] cros-ec@0 enforce active low on chipselect handle [ 0.955281] usbcore: registered new interface driver cdc_ether [ 0.956753] phy phy-12130000.phy.5: phy_power_on was called before phy_init [ 0.956768] exynos-ehci 12110000.usb: EHCI Host Controller [ 0.956793] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 0.957034] exynos-ehci 12110000.usb: irq 130, io mem 0x12110000 [ 0.971459] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 0.971647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.971663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.971676] usb usb1: Product: EHCI Host Controller [ 0.971686] usb usb1: Manufacturer: Linux 6.1.7-postmarketos-exynos5 ehci_hcd [ 0.971698] usb usb1: SerialNumber: 12110000.usb [ 0.972106] hub 1-0:1.0: USB hub found [ 0.972137] hub 1-0:1.0: 3 ports detected [ 0.972840] phy phy-12130000.phy.5: phy_power_on was called before phy_init [ 0.972855] exynos-ohci 12120000.usb: USB Host Controller [ 0.972873] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 0.972974] exynos-ohci 12120000.usb: irq 130, io mem 0x12120000 [ 1.035598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 1.035614] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.035627] usb usb2: Product: USB Host Controller [ 1.035637] usb usb2: Manufacturer: Linux 6.1.7-postmarketos-exynos5 ohci_hcd [ 1.035648] usb usb2: SerialNumber: 12120000.usb [ 1.036004] hub 2-0:1.0: USB hub found [ 1.036036] hub 2-0:1.0: 3 ports detected [ 1.037097] UDC core: g_ether: couldn't find an available UDC [ 1.037347] mousedev: PS/2 mouse device common for all mice [ 1.037527] i2c_dev: i2c /dev entries driver [ 1.042039] tpm_i2c_infineon 9-0020: 1.2 TPM (device-id 0x1A) [ 1.119717] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 1.120055] device-mapper: uevent: version 1.0.3 [ 1.120279] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.120701] sdhci: Secure Digital Host Controller Interface driver [ 1.120712] sdhci: Copyright(c) Pierre Ossman [ 1.120893] Synopsys Designware Multimedia Card Interface Driver [ 1.121664] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 1.121697] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 1.121814] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 1.121834] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 1.121893] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 136,64 bit host data width,64 deep fifo [ 1.121905] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 1.121923] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 1.121973] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 137,64 bit host data width,64 deep fifo [ 1.122035] mmc_host mmc0: card is non-removable. [ 1.122145] ledtrig-cpu: registered to indicate activity on CPUs [ 1.122568] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.122814] hid: raw HID events driver (C) Jiri Kosina [ 1.123126] spi_master spi2: will run message pump with realtime priority [ 1.133043] cros-ec-dev cros-ec-dev.6.auto: cannot get EC features: -95 [ 1.134700] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.134769] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.139579] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered [ 1.140151] tps65090 20-0048: No cache defaults, reading back from HW [ 1.144798] tps65090-pmic tps65090-pmic: could not find DCDC external control GPIO [ 1.144820] tps65090-pmic tps65090-pmic: could not find DCDC external control GPIO [ 1.144840] tps65090-pmic tps65090-pmic: could not find DCDC external control GPIO [ 1.172106] sbs-battery 20-000b: Disabling PEC because of broken Cros-EC implementation [ 1.197412] sbs-battery 20-000b: I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA. Fallback method does not support PEC. [ 1.214841] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.214920] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.215511] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.215717] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.215946] mmc0: new HS400 MMC card at address 0001 [ 1.216630] mmcblk0: mmc0:0001 MAG2GC 14.6 GiB [ 1.217927] cros-ec-spi spi2.0: Chrome EC device registered [ 1.221015] mmcblk0: p1 p2 p3 [ 1.221812] mmcblk0boot0: mmc0:0001 MAG2GC 4.00 MiB [ 1.223517] mmcblk0boot1: mmc0:0001 MAG2GC 4.00 MiB [ 1.224888] mmcblk0rpmb: mmc0:0001 MAG2GC 4.00 MiB, chardev (246:0) [ 1.227478] usb 1-1: new high-speed USB device number 2 using exynos-ehci [ 1.239348] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0-0) [ 1.239603] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0-1) [ 1.239793] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1-0) [ 1.239976] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1-1) [ 1.241434] NET: Registered PF_PACKET protocol family [ 1.241453] NET: Registered PF_KEY protocol family [ 1.241485] Key type dns_resolver registered [ 1.241989] Registering SWP/SWPB emulation handler [ 1.242215] registered taskstats version 1 [ 1.242235] Loading compiled-in X.509 certificates [ 1.242523] Key type .fscrypt registered [ 1.242534] Key type fscrypt-provisioning registered [ 1.243406] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.244521] Key type encrypted registered [ 1.319699] exynos-adc 12d10000.adc: error -ENXIO: IRQ index 1 not found [ 1.319891] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.320087] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.320106] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.320144] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 147,64 bit host data width,64 deep fifo [ 1.320456] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 1.320471] mmc_host mmc2: card is non-removable. [ 1.326011] OF: graph: no port node found in /soc/hdmi@14530000 [ 1.328322] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller [ 1.328346] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 3 [ 1.328866] xhci-hcd xhci-hcd.12.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 1.328943] xhci-hcd xhci-hcd.12.auto: irq 149, io mem 0x12000000 [ 1.329133] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller [ 1.329150] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 4 [ 1.329166] xhci-hcd xhci-hcd.12.auto: Host supports USB 3.0 SuperSpeed [ 1.329312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.329328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329341] usb usb3: Product: xHCI Host Controller [ 1.329351] usb usb3: Manufacturer: Linux 6.1.7-postmarketos-exynos5 xhci-hcd [ 1.329362] usb usb3: SerialNumber: xhci-hcd.12.auto [ 1.329857] hub 3-0:1.0: USB hub found [ 1.329890] hub 3-0:1.0: 1 port detected [ 1.330217] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.330326] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.330341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.330354] usb usb4: Product: xHCI Host Controller [ 1.330364] usb usb4: Manufacturer: Linux 6.1.7-postmarketos-exynos5 xhci-hcd [ 1.330375] usb usb4: SerialNumber: xhci-hcd.12.auto [ 1.330794] hub 4-0:1.0: USB hub found [ 1.330829] hub 4-0:1.0: 1 port detected [ 1.331470] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.332516] xhci-hcd xhci-hcd.13.auto: xHCI Host Controller [ 1.332538] xhci-hcd xhci-hcd.13.auto: new USB bus registered, assigned bus number 5 [ 1.333013] xhci-hcd xhci-hcd.13.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 1.333089] xhci-hcd xhci-hcd.13.auto: irq 150, io mem 0x12400000 [ 1.333271] xhci-hcd xhci-hcd.13.auto: xHCI Host Controller [ 1.333287] xhci-hcd xhci-hcd.13.auto: new USB bus registered, assigned bus number 6 [ 1.333303] xhci-hcd xhci-hcd.13.auto: Host supports USB 3.0 SuperSpeed [ 1.333436] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.333451] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.333463] usb usb5: Product: xHCI Host Controller [ 1.333473] usb usb5: Manufacturer: Linux 6.1.7-postmarketos-exynos5 xhci-hcd [ 1.333484] usb usb5: SerialNumber: xhci-hcd.13.auto [ 1.333893] hub 5-0:1.0: USB hub found [ 1.333923] hub 5-0:1.0: 1 port detected [ 1.334257] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.334369] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.334384] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.334397] usb usb6: Product: xHCI Host Controller [ 1.334407] usb usb6: Manufacturer: Linux 6.1.7-postmarketos-exynos5 xhci-hcd [ 1.334418] usb usb6: SerialNumber: xhci-hcd.13.auto [ 1.334782] hub 6-0:1.0: USB hub found [ 1.334812] hub 6-0:1.0: 1 port detected [ 1.371547] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.375856] Freeing unused kernel image (initmem) memory: 2048K [ 1.383671] mmc2: new high speed SDIO card at address 0001 [ 1.403977] Run /init as init process [ 1.403994] with arguments: [ 1.404006] /init [ 1.404012] with environment: [ 1.404017] HOME=/ [ 1.404022] TERM=linux [ 1.437146] Alpine Init 3.7.0-r1 [ 1.437727] Loading boot drivers... [ 1.453821] loop: module loaded [ 1.454381] Loading boot drivers: ok. [ 1.459209] usb 1-1: New USB device found, idVendor=2232, idProduct=1056, bcdDevice= 0.35 [ 1.459228] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.459241] usb 1-1: Product: WebCam SC-10HDM13631N [ 1.459251] usb 1-1: Manufacturer: Generic [ 1.459262] usb 1-1: SerialNumber: 200901010001 [ 1.465237] Mounting root... [ 1.591488] usb 5-1: new full-speed USB device number 2 using xhci-hcd [ 1.756420] usb 5-1: New USB device found, idVendor=0a46, idProduct=9601, bcdDevice= 1.01 [ 1.756454] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.756470] usb 5-1: Product: DM9601 USB NIC [ 1.756483] usb 5-1: Manufacturer: DM9601 USB NIC [ 1.756494] usb 5-1: SerialNumber: 9601 [ 1.867659] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 1.892601] usb 4-1: New USB device found, idVendor=1058, idProduct=264f, bcdDevice=20.05 [ 1.892631] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.892646] usb 4-1: Product: My Passport 264F [ 1.892659] usb 4-1: Manufacturer: Western Digital [ 1.892670] usb 4-1: SerialNumber: 323134324350343030353735 [ 1.898491] SCSI subsystem initialized [ 1.900348] usbcore: registered new interface driver usb-storage [ 1.931628] scsi host0: uas [ 1.932748] usbcore: registered new interface driver uas [ 3.001598] scsi 0:0:0:0: Direct-Access WD My Passport 264F 2005 PQ: 0 ANSI: 6 [ 3.004052] scsi 0:0:0:1: Enclosure WD SES Device 2005 PQ: 0 ANSI: 6 [ 3.054250] sd 0:0:0:0: [sda] 976707617 512-byte logical blocks: (500 GB/466 GiB) [ 3.054388] sd 0:0:0:0: [sda] Write Protect is off [ 3.054402] sd 0:0:0:0: [sda] Mode Sense: 37 00 10 00 [ 3.054628] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.054811] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.054824] sd 0:0:0:0: [sda] Optimal transfer size 1048576 bytes [ 3.097038] sda: sda1 sda2 sda3 sda4 sda5 [ 3.097767] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.662540] F2FS-fs (mmcblk0p3): recover fsync data on readonly fs [ 4.662799] F2FS-fs (mmcblk0p3): Mounted with checkpoint version = 66c48fce [ 4.663359] Mounting root: ok. [ 11.422704] tps65090-charger tps65090-charger: DMA mask not set [ 11.422916] tps65090-charger tps65090-charger: error -ENXIO: IRQ index 0 not found [ 11.499099] mc: Linux media interface: v0.10 [ 11.522070] videodev: Linux video capture interface: v2.00 [ 11.543714] s5p-mfc 11000000.codec: Adding to iommu group 3 [ 11.554878] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 11.555301] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 11.555319] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 11.555699] s5p-mfc 11000000.codec: decoder registered as /dev/video0 [ 11.555942] s5p-mfc 11000000.codec: encoder registered as /dev/video1 [ 11.577479] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 11.610210] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 11.618856] s5p-jpeg 11f50000.jpeg: Adding to iommu group 4 [ 11.619879] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video2 [ 11.620136] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video3 [ 11.620149] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 11.620780] s5p-jpeg 11f60000.jpeg: Adding to iommu group 5 [ 11.621461] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video4 [ 11.621788] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video5 [ 11.621798] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 11.626504] input: cros_ec as /devices/platform/soc/12d40000.spi/spi_master/spi2/spi2.0/12d40000.spi:cros-ec@0:keyboard-controller/input/input1 [ 11.713481] isl29018 7-0044: No cache defaults, reading back from HW [ 11.776124] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 11.776249] exynos-drm exynos-drm: bound 14400000.fimd (ops 0xc0e86724) [ 11.776588] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0e87050) [ 11.777009] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops 0xc0e86d74) [ 11.777033] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0e876cc) [ 11.777054] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully [ 11.777063] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0e88930) [ 11.777957] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 11.778123] rtc rtc0: invalid alarm value: 1900-01-01T01:18:55 [ 11.778549] s3c-rtc 101e0000.rtc: registered as rtc0 [ 11.778596] s3c-rtc 101e0000.rtc: setting system clock to 2023-01-26T20:49:25 UTC (1674766165) [ 11.819774] max98090 7-0010: MAX98091 REVID=0x52 [ 11.820368] max98090 7-0010: use default 2.8v micbias [ 11.824423] snow-audio sound: ASoC: driver name too long 'Peach-Pi-I2S-MAX98091' -> 'Peach-Pi-I2S-MA' [ 11.827202] input: Peach-Pi-I2S-MAX98091 Headphones as /devices/platform/sound/sound/card0/input2 [ 11.827656] input: Peach-Pi-I2S-MAX98091 Microphone as /devices/platform/sound/sound/card0/input3 [ 11.852616] hwmon hwmon0: temp1_input not attached to any thermal zone [ 11.852638] ntc-thermistor 12d10000.adc:thermistor3: Thermistor type: ncp15wb473 successfully probed. [ 11.853074] hwmon hwmon1: temp1_input not attached to any thermal zone [ 11.853087] ntc-thermistor 12d10000.adc:thermistor4: Thermistor type: ncp15wb473 successfully probed. [ 11.853450] hwmon hwmon2: temp1_input not attached to any thermal zone [ 11.853460] ntc-thermistor 12d10000.adc:thermistor5: Thermistor type: ncp15wb473 successfully probed. [ 11.853800] hwmon hwmon3: temp1_input not attached to any thermal zone [ 11.853812] ntc-thermistor 12d10000.adc:thermistor6: Thermistor type: ncp15wb473 successfully probed. [ 11.886860] atmel_mxt_ts 8-004b: supply vdda not found, using dummy regulator [ 11.887094] atmel_mxt_ts 8-004b: supply vdd not found, using dummy regulator [ 11.959365] atmel_mxt_ts 8-004b: Family: 130 Variant: 44 Firmware V3.0.AA Objects: 34 [ 11.971158] atmel_mxt_ts 8-004b: Direct firmware load for maxtouch.cfg failed with error -2 [ 11.971469] atmel_mxt_ts 8-004b: Resetting device [ 11.973408] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6 [ 11.974819] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7 [ 11.983616] debugfs: File ':soc:i2c@12ca0000:pmic@9' in directory 'domains' already present! [ 12.000664] max77686-rtc max77802-rtc: registered as rtc1 [ 12.036616] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.051259] Console: switching to colour frame buffer device 240x67 [ 12.058392] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.058491] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 12.058500] cfg80211: failed to load regulatory.db [ 12.063536] random: crng init done [ 12.079019] exynos-drm exynos-drm: [drm] fb0: exynosdrmfb frame buffer device [ 12.084176] atmel_mxt_ts 8-004b: Touchscreen size X1920Y1080 [ 12.084343] input: Atmel maXTouch Touchpad as /devices/platform/soc/12e00000.i2c/i2c-8/8-004b/input/input4 [ 12.094583] Bluetooth: Core ver 2.22 [ 12.094667] NET: Registered PF_BLUETOOTH protocol family [ 12.094674] Bluetooth: HCI device and connection manager initialized [ 12.094691] Bluetooth: HCI socket layer initialized [ 12.094702] Bluetooth: L2CAP socket layer initialized [ 12.094724] Bluetooth: SCO socket layer initialized [ 12.124596] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 [ 13.381266] mwifiex_sdio mmc2:0001:1: info: FW download over, size 717068 bytes [ 14.135506] mwifiex_sdio mmc2:0001:1: WLAN FW is active [ 14.135683] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2 [ 14.136560] btmrvl_sdio mmc2:0001:2: sdio device tree data not available [ 14.149114] dm9601 5-1:1.0 eth0: register 'dm9601' at usb-xhci-hcd.13.auto-1, Davicom DM96xx USB 10/100 Ethernet, 00:60:6e:00:48:1a [ 14.149464] usbcore: registered new interface driver dm9601 [ 14.184492] usb 1-1: Found UVC 1.00 device WebCam SC-10HDM13631N (2232:1056) [ 14.201166] input: WebCam SC-10HDM13631N: WebCam S as /devices/platform/soc/12110000.usb/usb1/1-1/1-1:1.0/input/input5 [ 14.202983] usbcore: registered new interface driver uvcvideo [ 14.244525] mwifiex_sdio mmc2:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p54) [ 14.244581] mwifiex_sdio mmc2:0001:1: driver_version = mwifiex 1.0 (15.68.19.p54) [ 14.317497] dm9601 5-1:1.0 eth0: link down [ 15.497234] PPP generic driver version 2.4.2 [ 15.546618] NET: Registered PF_INET6 protocol family [ 15.547525] Segment Routing with IPv6 [ 15.547547] In-situ OAM (IOAM) with IPv6 [ 15.558110] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 15.558122] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 15.569559] fuse: init (API version 7.37) [ 16.407500] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 24.292174] platform 10000000.chipid: deferred probe pending [ 25.764260] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.765236] dm9601 5-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1 [ 33.424216] panfrost 11800000.gpu: clock rate = 420000000 [ 33.427217] panfrost 11800000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device [ 33.427501] panfrost 11800000.gpu: mali-t620 id 0x620 major 0x0 minor 0x1 status 0x0 [ 33.427545] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,21eee400 [ 33.427582] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 [ 33.427639] panfrost 11800000.gpu: shader_present=0x3f l2_present=0x11 [ 33.428039] panfrost 11800000.gpu: using only 1st core group (4 cores from 6) [ 33.430697] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 1